Avatar billede smitx Praktikant
05. oktober 2007 - 22:17 Der er 40 kommentarer og
1 løsning

Komplet apache opsætning søges.

Hej eksperter.

Jeg har simpelthen fået nok af servage.net altid er nede, og få standardsvaret, de ikke har fejl, selvom brugere fra hele verden har modsatte erfaring, og vil hoste mine sider hjemme igen.

Jeg har forestillet mig apache, da IIS ikke kører optimalt med MySQL5, some for flere af mine scripts til at fejle.

Hvilken Apache version anbefales til windows?

Er der en der kan lave en config fil til mig, da jeg fatter minus af den :)
Har prøvet flere gange forgæves.

500 Points til den som kan lave en til mig, som bare funker perfekt, også rent sikkerhedsmæssigt, så man ikke lige bliver hacket første gang :D
Evt. sikkerheden når det er på win2003

Skal kører med følgende:

PHP5
MySQL5
IonCube Loader
Domain1.com
Domain2.com
Ved ikke om mail skal ind her også?

så kan jeg se hvordan den ser ud og kører videre på den :)

Bemærk det er Windows 2003 og ikke linux :)

På forhånd tak :)
Avatar billede smitx Praktikant
05. oktober 2007 - 22:18 #1
Ups mente 200 point :(
Avatar billede showsource Seniormester
05. oktober 2007 - 23:25 #2
hjaamm, http://www.phpbegynder.dk/artikler.php?id=20&page=1
Kender ikke ioncube loader

Men omkring sikkerhed, så er det et helt andet kapitel, afhængig af din comp setting o.s.v.
Men default er det "rimeligt" på NT system.
Avatar billede showsource Seniormester
05. oktober 2007 - 23:26 #3
At ha' flere domains på Apache er ikke noget problem, blot DNS peger på din ip
Avatar billede smitx Praktikant
06. oktober 2007 - 11:09 #4
Jamen jeg er lost :D

Selve installationen er gennemført, kan også se localhost.
Det er selve

Kan du rette følgende config, så den kan kører begge domæner samt PHP?:

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/Apache" will be interpreted by the
# server as "D:/Apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/Apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@pantheriouz.dk

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/Apache/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    Satisfy all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/Apache/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #  Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #  Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "D:/Apache/cgi-bin/"

</IfModule>

#
# "D:/Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/Apache/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

  #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#      starting without SSL on platforms with no /dev/random equivalent
#      but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Avatar billede showsource Seniormester
06. oktober 2007 - 11:41 #5
Php => http://www.phpbegynder.dk/artikler.php?id=20&page=3

Og vis mig indholdet af filen "httpd-vhosts.conf"
Den ligger i "D:/Apacheconf/extra/"
Avatar billede showsource Seniormester
06. oktober 2007 - 11:41 #6
hov,
"D:/Apache/conf/extra/"
Avatar billede smitx Praktikant
06. oktober 2007 - 12:24 #7
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
    ServerAdmin webmaster@dummy-host.dk
    DocumentRoot "/www/docs/dummy-host.dk"
    ServerName dummy-host.dk
    ServerAlias www.dummy-host.dk
    ErrorLog "logs/dummy-host.dk-error_log"
    CustomLog "logs/dummy-host.dk-access_log common"
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@dummy-host2.dk
    DocumentRoot "/www/docs/dummy-host2.dk"
    ServerName dummy-host2.dk
    ErrorLog "logs/dummy-host2.dk-error_log"
    CustomLog "logs/dummy-host2.dk-access_log common"
</VirtualHost>
Avatar billede showsource Seniormester
06. oktober 2007 - 12:52 #8
I din httpd.conf, skal linien,
#Include conf/extra/httpd-vhosts.conf
være
Include conf/extra/httpd-vhosts.conf

Første vhost der laves, er "default" host, d.v.s hvis et domain er sat til at pege på din ip adresse, men ikke sat op som vhost, vil den først definerede vhost blive vist.
Derfor laver jeg altid første vhost med ip-adressen alene.
Og bruger så en indexfil til at vise hvilke hosts som findes på serveren.
Derudover vil en evt. "ip-spammer" ikke requeste en evt. stor indexfil.

plus, men ikke mindst, så er det min erfaring at søgerobotter ret hurtigt får indekseret de forskellige domains ?????

Og jeg laver altid et dir, hvorfra de forskellige hosts har "homedir".
Her er brugt "D:/www/" + "domainnavn" som DocumentRoot


httpd-vhosts.conf :

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#

# KUN IP ADRESSE
<VirtualHost *:80>
    ServerAdmin din@mail.dk
    DocumentRoot "D:/www/ip"
    ServerName 123.456.789.111
    ErrorLog "D:/apache/logs/ip-error_log"
    CustomLog "D:/apache/logs/ip-access_log common"
</VirtualHost>


# DOMAIN_1
<VirtualHost *:80>
    ServerAdmin din@mail.dk
    DocumentRoot "D:/www/domain_1"
    ServerName domain_1.dk
    ServerAlias www.domain_1.dk
    ErrorLog "D:/apache/logs/domain_1.dk-error_log"
    CustomLog "D:/apache/logs/domain_1.dk-access_log common"
</VirtualHost>

# DOMAIN_2
<VirtualHost *:80>
    ServerAdmin din@mail.dk
    DocumentRoot "D:/www/domain_2"
    ServerName domain_2.dk
    ServerAlias www.domain_2.dk
    ErrorLog "D:/apache/logs/domain_2.dk-error_log"
    CustomLog "D:/apache/logs/domain_2.dk-access_log common"
</VirtualHost>


Har du fået php til at virke?
Avatar billede smitx Praktikant
06. oktober 2007 - 12:58 #9
Jeg skal lige installerer apache igen, fik lige lavet ged i php.

Ville ikke kører med MySQL :D

Jeg vender tilbage snarest muligt :)
Avatar billede showsource Seniormester
06. oktober 2007 - 13:23 #10
Avatar billede smitx Praktikant
06. oktober 2007 - 13:51 #11
Så er jeg tilbage.

Jeg får nu følgende fejl når jeg prøver at starte apache op med den nye vhostfil:

The Apache service named  reported the following error:
>>> CustomLog takes two or three arguments, a file name, a custom log format string or format name, and an optional "env=" clause

:(
Avatar billede showsource Seniormester
06. oktober 2007 - 13:59 #12
arghh, prøv lige at bruge # foran, så der ikke er defineret nogen logfil pr. vhost
#    ErrorLog "D:/apache/logs/domain_2.dk-error_log"
#    CustomLog "D:/apache/logs/domain_2.dk-access_log common"
Avatar billede smitx Praktikant
06. oktober 2007 - 14:03 #13
Så startede det op :D

Men jeg for 403 fejl på alle sider :D

Webstedet afviste at vise denne webside.
HTTP 403
Avatar billede showsource Seniormester
06. oktober 2007 - 14:09 #14
Jahh, det er sgu da rigtigt, i 2'eren er der ikke adgang, medmindre du definerer det.

<Directory "D:/www/domain1">
    Options FollowSymlinks
    Order allow,deny
    Allow from all
</Directory>

Men der var også noget med dette, i det første link jeg postede til apache doc.
Men i første omgang, er det jo et spm. om at den virker! :O)

Virker Mysql og PHP ???
Avatar billede showsource Seniormester
06. oktober 2007 - 14:09 #15
Og hov, den directory blok bruger du inde i vhost'en
Avatar billede smitx Praktikant
06. oktober 2007 - 14:10 #16
Ja MySQL og php virker, var i mysql før via phpmyadmin via localhost før :)
Avatar billede smitx Praktikant
06. oktober 2007 - 14:12 #17
Forstår ikk hvad du mener med: Og hov, den directory blok bruger du inde i vhost'en ?

Og hvor skal dette stå?:
<Directory "D:/www/domain1">
    Options FollowSymlinks
    Order allow,deny
    Allow from all
</Directory>


sorry men jeg er n00b i apache :)
håber du er tålmoding :)
Avatar billede showsource Seniormester
06. oktober 2007 - 14:14 #18
jowjow :O)

F.eks.

# KUN IP ADRESSE
<VirtualHost *:80>
    ServerAdmin din@mail.dk
    DocumentRoot "D:/www/ip"
    ServerName 123.456.789.111
#  ErrorLog "D:/apache/logs/ip-error_log"
#    CustomLog "D:/apache/logs/ip-access_log common"

<Directory "D:/www/ip">
    Options FollowSymlinks
    Order allow,deny
    Allow from all
</Directory>

</VirtualHost>
Avatar billede smitx Praktikant
06. oktober 2007 - 14:21 #19
Bingo så virker det :D

Du er genial :)

Husk lige at smide et svar :)

Lige et par tillægsspørgsmål ;)

Logfiler virker de så ikke?
Og er de 2 filer sikker nok imod hackere ect. nu?
Avatar billede smitx Praktikant
06. oktober 2007 - 14:21 #20
Jeg mener httpd-vhosts.conf og httpd.conf?
Avatar billede smitx Praktikant
06. oktober 2007 - 14:23 #21
hihi jeg kan desværre blive ved :(

Hvordan tilføjer man så subdomæne?

f.eks. sub.domæne.dk
Avatar billede showsource Seniormester
06. oktober 2007 - 14:33 #22
Et subdomain, laver du på samme måde.
Men hvis IKKE du i DNS har lavet et "wildcard" på navnet, eller direkte defineret subdomain'et, vil det jo ikke virke.
Bruger selv gratisdns.dk, og bruger gerne *.doamin.dk til at pege på samme ip.
Så fanges www.doamin.dk også
Når det er gjort, eller subdomainnavn direkte er defineret i DNS, så laver du subs på samme måde.


Lige nu er logfileN den samme for alle domains.

ehh, en hacker skal jo hacke sig ind i systemet for at få fat på filerne. Og hvis først han/hun er inde på en windåze, er der normalt læse/skrev adgang til alle filer (mere eller mindre).
Det er nok værd at kikke/søge i "sikkerhed" kategorien her på exp
Avatar billede smitx Praktikant
06. oktober 2007 - 14:35 #23
ok jeg siger tusing tak for hjælpen showsource :)

Husk at smide et svar :)
Avatar billede showsource Seniormester
06. oktober 2007 - 14:38 #24
M.h.t. til den directory-blok, vil jeg mene du kan undgå at bruge FollowSymLinks, da den jo er sat i den første directory blok i din httpd.conf.
D.v.s blot:

<Directory D:/www/domain>
    Order allow,deny
    Allow from all
</Directory>
Avatar billede smitx Praktikant
06. oktober 2007 - 14:39 #25
Prøver mig frem :)

Takker...
Avatar billede showsource Seniormester
06. oktober 2007 - 14:40 #26
Derudover bør du nok bruge noget php-restriktion for hvert vhost, så du ikek risikerer et php script crasher dit system.
Du bruger vel LoadModule i din httpd.conf ? Hvis ikke, er det en fejl!
Avatar billede smitx Praktikant
06. oktober 2007 - 14:43 #27
Ja jeg bruger LoadModule går jeg ud fra :D

Hvis det er denne du mener?
LoadModule php5_module "C:/Apache/php/php5apache2_2.dll"
Avatar billede showsource Seniormester
06. oktober 2007 - 14:43 #28
F.eks. inde i din vhost

<vhost-------- >

<IfModule mod_php5.c>

  php_admin_value open_basedir D:/www/domain
  php_admin_value upload_tmp_dir D:/www/uploads

</IfModule>

<Directory-------->


</Directory------->

</vhost>
Avatar billede showsource Seniormester
06. oktober 2007 - 14:44 #29
Tak for points ! :O)
Avatar billede smitx Praktikant
06. oktober 2007 - 14:46 #30
Der røg jeg at sporet :D
Avatar billede smitx Praktikant
06. oktober 2007 - 14:47 #31
Jeg kan ikke se noget af dette i vhost??

F.eks. inde i din vhost

<vhost-------- >

<IfModule mod_php5.c>

  php_admin_value open_basedir D:/www/domain
  php_admin_value upload_tmp_dir D:/www/uploads

</IfModule>

<Directory-------->


</Directory------->

</vhost>
Avatar billede showsource Seniormester
06. oktober 2007 - 14:51 #32
# DOMAIN_1
<VirtualHost *:80>
    ServerAdmin din@mail.dk
    DocumentRoot "D:/www/domain_1"
    ServerName domain_1.dk
    ServerAlias www.domain_1.dk
#    ErrorLog "D:/apache/logs/domain_1.dk-error_log"
#    CustomLog "D:/apache/logs/domain_1.dk-access_log common"


<Directory D:/www/domain_1>
    Order allow,deny
    Allow from all
</Directory>

<IfModule mod_php5.c>

  php_admin_value open_basedir D:/www/domain_1

</IfModule>


</VirtualHost>
Avatar billede showsource Seniormester
06. oktober 2007 - 14:56 #33
Og b.t.w. gør det til en go' vane IKEK at bruge mellemrum i dine sti-angivelser.
Hvis du VIL bruge mellemrum, så husk at bruge " før og efter stien

DocumentRoot "D:/www/public sites/domain"
Avatar billede smitx Praktikant
06. oktober 2007 - 15:41 #34
Mange tak :)
Avatar billede smitx Praktikant
06. oktober 2007 - 16:21 #35
Hjælp!!!!

hvad mangler jeg?

Jeg kan ikke importerer sql filer, hverken normal, gzip eller zip ?
Avatar billede smitx Praktikant
06. oktober 2007 - 16:22 #36
I phpmyadmin mener jeg :)
Avatar billede smitx Praktikant
06. oktober 2007 - 16:31 #37
Skriver bare Filen kunne ikke læses???
Avatar billede showsource Seniormester
06. oktober 2007 - 18:17 #38
Hvad hvis du bruger "SQL"
Åbner filen i notepad, markerer alt, kopiere, og paster ind i textarea feltet ???
Avatar billede smitx Praktikant
06. oktober 2007 - 18:42 #39
ja funker, men kan man ikke importerer sql filer i apache?

Virkede 100% i IIS :(
Avatar billede showsource Seniormester
07. oktober 2007 - 08:07 #40
Bruger du

<IfModule mod_php5.c>

  php_admin_value open_basedir D:/www/domain_1

</IfModule>

Så skal du nok lige ha'

php_admin_value upload_tmp_dir C:/temp

<IfModule mod_php5.c>

  php_admin_value open_basedir D:/www/domain_1
  php_admin_value upload_tmp_dir C:/temp

</IfModule>


med
Avatar billede showsource Seniormester
07. oktober 2007 - 17:19 #41
Se, det var jo så noget vrøvl......
Hvis du bruger open_basedir, og du vil ha' fat i en uploaded fil INDEN brug af move_uploaded_file() skal du sætte upload_tmp_dir til et dir som ligger i open_basedir !!!
Avatar billede Ny bruger Nybegynder

Din løsning...

Tilladte BB-code-tags: [b]fed[/b] [i]kursiv[/i] [u]understreget[/u] Web- og emailadresser omdannes automatisk til links. Der sættes "nofollow" på alle links.

Loading billede Opret Preview
Kategori
Uanset kodesprog, så giver vi dig mulighederne for at udvikle det, du behøver.

Log ind eller opret profil

Hov!

For at kunne deltage på Computerworld Eksperten skal du være logget ind.

Det er heldigvis nemt at oprette en bruger: Det tager to minutter og du kan vælge at bruge enten e-mail, Facebook eller Google som login.

Du kan også logge ind via nedenstående tjenester