PIX 515e stopper efter genstart

Jeg har en PIX 515e, den virker ok når jeg konfigurerer den.
Jeg vil gerne tilgå min SQL server på port 1433.
Efter endt konfiguration skriver jeg 'write mem' og den virker stadigvæk.
MEN efter reboot kan jeg ikke tilgå min SQL server mere?
Mangler jeg noget i min konfiguration?

PIX Version 6.3(4)
Outside IP 10.0.0.1 GT 10.0.0.2
Inside IP 192.168.1.10
SQL IP 192.168.1.40

fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list IntOutside permit tcp any interface outside eq 1433
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside 10.0.0.1 255.255.255.0
ip address inside 192.168.1.10 255.255.255.0
no ip address intf2
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
static (inside,outside) tcp 10.0.0.1 1433 192.168.1.40 1433 netmask 255.255.255.255 0 0
access-group IntOutside in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80