Avatar billede streak Nybegynder
03. august 2000 - 09:26 Der er 21 kommentarer og
1 løsning

php + apache

Jeg har et mindre problem med min apache server. Jeg har fået installeret php som et apache modul, men når jeg vil prøve at køre et at mine scripts, så bliver jeg bedt om at hente/gemme filen eller selve filen bliver vist på skærmen. Hvad der det lige der sker her ??
Jeg har lavet en httpd -l og i den blivet mit php4 modul vist fint i:
mod_php4.c
Så de må altså være der !!!
Avatar billede lojmann Nybegynder
03. august 2000 - 09:40 #1
mod_php4.c - er det ikke bare sourcen???

Hvad har du skrevet hvor for at installere PHP modulet på apache?
Avatar billede streak Nybegynder
03. august 2000 - 09:48 #2
jeg har fulgt den vejledning der er på php.net. Den var da godt nok til php3 men der burde da ikke være det helt store forskelle.
1. configure --prefix=/www (Apache)
2. configure --with-apache=../apache --with-mysql (PHP)
3. make (php)
4. make install (php)
5. configure --prefix=/www --activate-module=src/modules/php4/libphp4.a (Apache)
6. make (Apache)
7. make install (Apache)
8. cp php.ini-dist /usr/local/lib/php.ini
9. Udkommenteret linier i /www/cong/httpd.conf (AddType application/x-httpd-php3 .php3)

Det er alt hvad jeg har gjort.

Er der noget jeg har glemt ???
Avatar billede razor Nybegynder
03. august 2000 - 10:03 #3
prøv at kigge på jonas\' guide på http://webcafe.pil.dk/diverse/artikler/028/da028.php3
Avatar billede streak Nybegynder
03. august 2000 - 10:14 #4
razor: Jeg kigger lige på den !!!
Avatar billede streak Nybegynder
03. august 2000 - 10:52 #5
jeg har lige kørt den igennem på den side som razor gav mig, og det hjalp ikke noget.
Min browser vil stadig kun vise indholdet af filen og ikke det output som den burde gennerere, samt så spørger den også stadig om jeg vil gemme filen hvis jeg reloader vinduet.....

So .... thats still a NO GO !!!
Avatar billede lojmann Nybegynder
03. august 2000 - 11:10 #6
Hm...

Hvordan ser dit script ud?
Avatar billede streak Nybegynder
03. august 2000 - 11:14 #7
scriptet er der ikke noget galt med. Det køre allerede på en eksisterende server i KBH. Den maskine som jeg arbejder med lige nu skal sendes over til messen i bellacenteret. Så det haster ret meget dette her !!!
Avatar billede lojmann Nybegynder
03. august 2000 - 11:17 #8
Er det en Windows eller Linux maskine du har det på?
Avatar billede streak Nybegynder
03. august 2000 - 11:20 #9
det er en linux maskien. Det hele køre på en Red Har 6.1.
Det eneste der ikke virker, er min php, og det skal den sku !! Jeg har testet både apache og mysql og de virker fint, bare ikke php...
Avatar billede lojmann Nybegynder
03. august 2000 - 11:21 #10
Kan vi se nogle conf-filer?
Avatar billede streak Nybegynder
03. august 2000 - 11:28 #11
ok !!!

httpd.conf:
==============================
##
## httpd.conf -- Apache HTTP server configuration file
##

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They\'re here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# After this file is processed, the server will look for and process
# /usr/local/apache/conf/srm.conf and then /usr/local/apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#    whole (the \'global environment\').
#  2. Directives that define the parameters of the \'main\' or \'default\' server,
#    which responds to requests that aren\'t handled by a virtual host.
#    These directives also provide default values for the settings
#    of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#    different IP addresses or hostnames and have them handled by the
#    same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server\'s control files begin with \"/\" (or \"drive:/\" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with \"/\", the value of ServerRoot is prepended -- so \"logs/foo.log\"
# with ServerRoot set to \"/usr/local/apache\" will be interpreted by the
# server as \"/usr/local/apache/logs/foo.log\".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone.  Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server\'s
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot \"/usr/local/apache\"

#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
#LockFile /usr/local/apache/logs/httpd.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /usr/local/apache/logs/httpd.pid

#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this.  But if yours does (you\'ll know because
# this file will be  created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /usr/local/apache/logs/httpd.scoreboard

#
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order.  The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity.  The commented-out values
# below are the built-in defaults.  You can have the server ignore
# these files altogether by using \"/dev/null\" (for Unix) or
# \"nul\" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to \"Off\" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 10

#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 5

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems, this
# isn\'t really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
#      request per connection. For example, if a child process handles
#      an initial request and 10 subsequent \"keptalive\" requests, it
#      would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain \"*\", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule\' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l\' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order is which modules are loaded is important.  Don\'t change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so

#
# ExtendedStatus controls whether Apache will generate \"full\" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the \"server-status\" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: \'Main\' server configuration
#
# The directives in this section set up the values used by the \'main\'
# server, which responds to any requests that aren\'t handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the \'Global Environment\'
# section) is set to \"inetd\", the next few directives don\'t have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use \"User nouser\" and \"Group nogroup\".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don\'t use Group nobody on these systems!
#
User nobody
Group nobody

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin root@kennedysko.localdomain

#
# ServerName allows you to set a host name which is sent back to clients for
# your server if it\'s different than the one the program would get (i.e., use
# \"www\" instead of the host\'s real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don\'t understand
# this, ask your network administrator.
# If your host doesn\'t have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
#ServerName kennedysko.localdomain

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot \"/usr/local/apache/htdocs\"

#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the \"default\" to be a very restrictive set of
# permissions. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something\'s not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory \"/usr/local/apache/htdocs\">

#
# This may also be \"None\", \"All\", or any combination of \"Indexes\",
# \"Includes\", \"FollowSymLinks\", \"ExecCGI\", or \"MultiViews\".
#
# Note that \"MultiViews\" must be named *explicitly* --- \"Options All\"
# doesn\'t give it to you.
#
    Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be \"All\", or any combination of \"Options\", \"FileInfo\",
# \"AuthConfig\", and \"Limit\"
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user\'s home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
    UserDir public_html
</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    DirectoryIndex index.html index.htm index.php3 index.php
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ \"^\\.ht\">
    Order allow,deny
    Deny from all
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends \"Pragma: no-cache\" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a \"canonical\" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
    TypesConfig /usr/local/apache/conf/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, \"text/plain\" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use \"application/octet-stream\" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the \'Global
# Environment\' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it\'s enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /usr/local/apache/conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it\'d be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host\'s errors will be logged there and not here.
#
ErrorLog /usr/local/apache/logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat \"%h %l %u %t \\\"%r\\\" %>s %b \\\"%{Referer}i\\\" \\\"%{User-Agent}i\\\"\" combined
LogFormat \"%h %l %u %t \\\"%r\\\" %>s %b\" common
LogFormat \"%{Referer}i -> %U\" referer
LogFormat \"%{User-agent}i\" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /usr/local/apache/logs/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /usr/local/apache/logs/referer_log referer
#CustomLog /usr/local/apache/logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /usr/local/apache/logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to \"EMail\" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
<IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So \"/icons\" isn\'t aliased in this
    # example, only \"/icons/\"..
    #
    Alias /icons/ \"/usr/local/apache/icons/\"

    <Directory \"/usr/local/apache/icons\">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing \"/\" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ \"/usr/local/apache/cgi-bin/\"

    #
    # \"/usr/local/apache/cgi-bin\" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory \"/usr/local/apache/cgi-bin\">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to exist in
# your server\'s namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or standard
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription \"description\" filename
    #
    #AddDescription \"GZIP compressed document\" .gz
    #AddDescription \"tar archive\" .tar
    #AddDescription \"GZIP compressed tar archive\" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    #
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found.  If name.html
    # doesn\'t exist, the server will then look for name.txt and include
    # it as plaintext if found.
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz

    #
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand. 
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use \"AddLanguage pl .po\" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character \'Language\' abbriviation is not
    # identical to the two character \'Country\' code for its country,
    # E.g. \'Danmark/dk\' versus \'Danish/da\'.
    #
    # Note 3: In the case of \'ltz\' we violate the RFC by using a three char
    # specifier. But there is \'work in progress\' to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .se
    AddLanguage cz .cz

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en da nl et fr de el it ja pl pt pt-br ltz ca es sv
    </IfModule>

    #
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    #
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #
    AddType application/x-httpd-php3 .php3
    AddType application/x-httpd-php3-source .phps
    #
    # And for PHP 4.x, use:
    #
    AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps

    AddType application/x-tar .tgz

    #
    # AddHandler allows you to map certain file extensions to \"handlers\",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache\'s send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 \"The server made a boo boo.
#  n.b.  the (\") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    #
    BrowserMatch \"Mozilla/2\" nokeepalive
    BrowserMatch \"MSIE 4\\.0b2;\" nokeepalive downgrade-1.0 force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch \"RealPlayer 4\\.0\" force-response-1.0
    BrowserMatch \"Java/1\\.0\" force-response-1.0
    BrowserMatch \"JDK/1\\.0\" force-response-1.0

</IfModule>

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the \".your_domain.com\" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
http://servername/server-info (requires that mod_info.c be loaded).
# Change the \".your_domain.com\" to match your domain to enable
Avatar billede lojmann Nybegynder
03. august 2000 - 11:35 #12
#ServerName kennedysko.localdomain skulle det ikke være ServerName kennedysko.localdomain ??? Det hjælper ikke på PHP\'en, men bare en ide :)

PHP bliver jo heller ikke startet i filen der, jeg kan i al fald ikke se det!
Avatar billede streak Nybegynder
03. august 2000 - 11:38 #13
Hm... Det ved jeg sku ikke lige noget om det der. Det eneste som jeg ved er at min apache er blevet installeret med php som et modul. Det var da det der var meningen med det. Hvor skulle php så startes fra??
Avatar billede lojmann Nybegynder
03. august 2000 - 11:43 #14
Du er sikker på at endelsen på filen er en af dem som du har add\'et i AddType, ikke?

Avatar billede streak Nybegynder
03. august 2000 - 11:44 #15
joo .. da. Alle mine scripts ender med .php3 så det burde altså virke.
Avatar billede lojmann Nybegynder
03. august 2000 - 11:46 #16
Hm... mon det ville ændre noget, hvis du ændrede \"AddType application/x-httpd-php .php\" til \"AddType application/x-httpd-php .php .php3\" ??
Avatar billede streak Nybegynder
03. august 2000 - 11:51 #17
det er da værd at prøve !!!
Avatar billede streak Nybegynder
03. august 2000 - 11:52 #18
uhh.... det ser sku ud til at virke....... nu skal jeg bare lige have oprettet en sql bruger... og så sku det være oppe at køre !!!
Avatar billede lojmann Nybegynder
03. august 2000 - 11:53 #19
Fint :)
Avatar billede lojmann Nybegynder
03. august 2000 - 11:56 #20
Men en ide, var at ændre alle .php3 til .php - så skal man ikke tænke på \"versions nummeret\", hvis du forstår...
Avatar billede streak Nybegynder
03. august 2000 - 12:02 #21
Det kan du tro jeg gør !!! Tak skal du have. You just saved my day!!!
Avatar billede lojmann Nybegynder
03. august 2000 - 12:47 #22
He he, så lidt :)
Avatar billede Ny bruger Nybegynder

Din løsning...

Tilladte BB-code-tags: [b]fed[/b] [i]kursiv[/i] [u]understreget[/u] Web- og emailadresser omdannes automatisk til links. Der sættes "nofollow" på alle links.

Loading billede Opret Preview
Kategori
Vi tilbyder markedets bedste kurser inden for webudvikling

Log ind eller opret profil

Hov!

For at kunne deltage på Computerworld Eksperten skal du være logget ind.

Det er heldigvis nemt at oprette en bruger: Det tager to minutter og du kan vælge at bruge enten e-mail, Facebook eller Google som login.

Du kan også logge ind via nedenstående tjenester