Zyxel Es-2024 switch - nulstil admin login

Her er hvordan man kan nulstille hele switchen via console - men savner en måde at nulstille login ?

ftp://ftp.zyxel.com/ES-2024A/support_note/ES-2024A_3.60.pdf

Connect to the console port and open the Terminal Emulation Software.
ES-2024 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
6
2. Restarting the Switch to enter the debug mode via the terminal.
3. Enter "ATLC"
4. Use X-modem protocol to transfer (Send File) the firmware.
5. Enter "ATGO" to restart the Switch after done uploading the configuration
file.
From Command Line FTP:
1. Download (and unzipped) the correct model

Her er hvordan hele switchen nulstilles til defaults

From Console Port:
1. Connect to the console port and open the Terminal Emulation Software.
2. Type in the correct password to bring up the prompt.
Type "erase run" to load the factory default configurations.

If you forget the password, how to reset the password to default?
If you forget the password, you will need to reload the factory default
configuration. Please be aware that you will lose all previous configurations.

1. Connect the console cable to your computer and open the terminal
ES-2024 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
71
emulation software.
2. Power off and then power on the Switch, and press any key to enter the
debug mode when the screen shows "Press any key to enter Debug Mode
within 3 seconds."
3. Type "atlc" and press the enter key
4. When the message "starting XMODEM upload" appears, do XMODEM
upload of the default rom file to the Switch
5. After it is done uploading the rom file successfully, type "atgo" to leave the
debug mode.
6. The system will be restarted automatically. After the system is up, you
should be able to log in with the default password "1234" and the IP
address is now 192.168.1.1.
How do I configure an IP address?

osv - Kan det virkelig passe man ikke kan nulstille login eller åbne for den på anden måde ?

Ingen hjælp ?

lukker

Lykkedes det dig at få den nulstillet? og i så fald, hvordan?