windows 98 hjælp til ntfs

Du skal bruge et 3. parts program, da win98 ikke kan læse NTFS.

Jeg mener NTFS reader kan gøre det du efterlyser...

Windows 98 understøtter ikke som standard NTFS. Der findes dog visse NTFS drivere på nettet, som er lavet til Win98.

hvor kan jeg finde det jeg skal bruge kom med nogen links er vildt lost ang. det her

Brug på eget ansvar: http://www.studna.cz/go/detail.php/fid/474

Du skal bruge dette program: http://www.ntfs.com/downloads/NtfsFloppySetup.exe

Der er jo "NTFS for Windows 98":
http://www.sysinternals.com/ntw2k/freeware/ntfswin98.shtml

og hva kan der ske ved at bruge det ? godt og dårligt

der kan ikke ske noget ved at bruge det (går ud fra du snakker til mig???)

godt: du får adgang til din partition :)

dårligt ? mister jeg mine data ?

nej - da de programmer der linkes kun tilbyder "Read-only" - altså får du kun lov til at se indhold - ikke slette.

sysinternals' ntfs til win98 giver fatisk også skriveadgang..

så jeg kan prgramet gør at jeg kan bruge mit data som et alm drev eller ?

Ja, det kan det vel :)
Men, hvis jeg var dig, ville jeg kopiere data'ene fra NTFS partitionen, og over på FAT32 partitionen.. derefter ville for formatere NTFS til FAT32.
Og så ville jeg holde mig til FAT32, selv om jeg måske skifter til Windows XP.

Fat32 kan ses/læses af DOS, Windows 95/98/ME/NT/2000/XP
NTFS kan kun ses/læses af Windows NT/2000/XP.

det ved jeg og har igen anelse om hva jeg lavede da jeg konventerede en gang i tidernes morgen=)

okay nu skal jeg bruge hjælp til konfiguration for nfts i 98 nogen der kan klare det ?

Jeg mener ikke 98 kan konvertere noget til NTFS, så du må vel have (haft...) 2K eller XP, lægger du det ind som NTFS er der ingen problemer mere.

Fra urlen ( http://www.sysinternals.com/ntw2k/freeware/ntfswin98.shtml ):

Installation
Before you run the NTFS for Windows 98 installation program, you must have access to a number of files (listed below) from the Windows NT/2000/XP installation you use to access your NTFS drives. This means that if the files are located on a NTFS drive you will have to copy them to a FAT drive accessible from Windows 98.

During the NTFS for Windows 98 setup procedure you will be prompted for the location of these files. You may specify either the system directory of a Windows NT/2000/XP installation (e.g. c:\winnt), or a directory into which you've copied the necessary files. The files that you must make available to NTFS for Windows 98 are:
NTFS.SYS: this file is located at \system32\drivers\ntfs.sys
NTOSKRNL.EXE: this file is located at \system32\ntoskrnl.exe
AUTOCHK.EXE: this file is located at \system32\autochk.exe
NTDLL.DLL: this file is located at \system32\ntdll.dll
C_437.NLS: this file is located at \system32\c_437.nls
C_1252.NLS: this file is located at \system32\c_1252.nls
L_INTL.NLS: this file is located at \system32\l_intl.nls
<winnt> designates the system directory of the Windows NT/2000/XP installation that contains the NTFS driver you normally use to access your NTFS drives.

The setup procedure allows you to assign drive letters to NTFS drives that NTFS for Windows 98 mounts. Simply enter a string in the drive-letter selection entry that designates, in order, the drive letters for NTFS for Windows 98 to assign. For example, if you want the first NTFS drive mounted to have a drive letter of 'D' and the second to have a drive letter of 'T', you would enter "dt" (without the quotation marks). Note that the entry is case-insensitive. Leaving the entry blank has NTFS for Windows 98 assign the first available drive letter to each mounted NTFS drive.

After the setup procedure is complete you are prompted to reboot your computer. The next time you boot the Windows 95 or 98 system on which you installed NTFS for Windows 98 you will have access to your computer's NTFS volumes. You may rerun the configuration utility at any time to select different drive letters or a different NTFS file.
Chkdsk
NTFS for Windows 98 includes a scandisk for NTFS drives named NTFSCHK. In the same way that NTFS for Windows 98 creates an NT-like environment for the NTFS driver, NTFSCHK creates an NT-like environment for the AUTOCHK.EXE (chkdsk) program of a Windows NT/2000/XP installation. The files that make up this environment include AUTOCHK.EXE, NTDLL.DLL, and three character mapping files, C_437.NLS, C_1252.NLS, and L_INTL.NLS.

The NTFS for Windows 98 setup program adds the execution of NTFSCHK to your AUTOEXEC.BAT file so that the consistency of your NTFS drives is checked every time you boot into Windows 95/98. You may also run NTFSCHK from DOS before Windows 95/98 starts, from a DOS-box command prompt, or by selecting the NTFSCHK icon in the NTFS for Windows 98 program group in the Start menu.

In some cases NTFSCHK will indicate that it cannot lock the specified drive(s). This condition results when applications or Windows has active handles to open files on the NTFS drive for which NTFSCHK reports the condition. If the applications in question do not close their handles, or Windows keeps open handles, you must reboot the computer and run NTFSCHK before the drive is accessed by applications or Windows, or reboot into Windows NT/2000/XP and perform a chkdsk operation there.

While NTFSCHK scans a drive that drive will not be accessible. If you click on the drive icon in Explorer you will receive an "access denied" error message. If Explorer is opened to directories on a drive being checked and you attempt to navigate the directories you will receive errors indicating that the directories do not exist.

NTFSCHK's command-line usage is as follows (selecting the NTFSCHK program icon results in a check of all the computer's NTFS drives):

ntfschk [/s] [/f] [/q] [ drive letter: | * ]


/s    This switch has NTFSCHK display the list of detected NTFS drives. Use this command to determine which drive letters correspond to NTFS volumes.    
/f    Unless you specify this flag NTFSCHK runs in read-only mode, where it detects and reports errors but does not correct them. Use this flag to fix drives for which NTFSCHK reports corruption.    
/q    This switch has NTFSCHK perform a quick check of the specified NTFS drive(s), by not setting the NTFS drive "dirty" flag on the disk(s). Thus, NTFSCHK will only check the drive if it is marked as being in a possibly inconsistent state.    
*    Has NTFSCHK check all NTFS drives, or you can specify a specific drive letter (e.g. D:) to check.

kan så sige jeg ik har de filer :S kan man kopiere dem fra xp cd'en?

Ja, de skulle gerne ligge på enten 2000 cd'en eller xp'en..

During the NTFS for Windows 98 setup procedure you will be prompted for the location of these files. You may specify either the system directory of a Windows NT/2000/XP installation (e.g. c:\winnt), or a directory into which you've copied the necessary files.